OPERATION STEPS
- Open the top lid by pressing the buttons on both sides of the machine
- Pull out th roll bag from the cabinet. Please note that the opening of the bag need to be placed outward
- Pull the bag out to the required lenght, then closed the lid
- Slide the cutter to cut the bag then press the button to seal the bag or vacuum button and seal the bag
PRE-CUT BAG USING INSTRUCTIONS
- Place the opening of the vacuum bag into the vacuum slot evenly
- Close the top cover and press the VAC-SEAL button to finishing vacuuming and sealing
IT IS VERY IMPORTANT THAT THE BAG IS WELL POSITIONED INSIDE THE MACHINE AND THAT THE COVER IS WELL CLOSED. 1 CLICK MUST BE HEARD EACH SIDE OF THE COVER. THIS MEANS THAT THE COVER IS CLOSED CORRECTLY AND THE MACHINE CORRECTLY PERFORMS THE VACUUM PACKAGING.
IF THE MACHINE CONTINUES TO SUCTION WITHOUT SEALING IT MEANS THAT THE BAG AND / OR THE LID ARE NOT CORRECTLY PUT