The removal of the glass of the fireplace is used to insert the decorative stones inside it. We recommend performing the third point operation in two people

Place the fireplace on a flat surface with the glass facing upwards

With the aid of a X screwdriver remove the 6 screws (3 on each side) located laterally

Hold the main unit and gently slide the glass upwards as shown in the attached image) and lift it upwards.

Place the removed glass on a stable surface being careful not to break it.

Place the decorative stones inside and reposition the glass.

Re-tighten the 6 screws (3     on each side) and proceed with the installation of the product on the wall.We recommend moving it gently to prevent stones from damaging the glass